TAKATA MINI I-SIZE Instructions Manual page 81

Reattaching the covers
To fully reattach all TAKATA MINI I-SIZE covers,
please follow the instructions for "Removing the covers"
in reverse.
[MINI_I-SIZE_016] Only use the TAKATA MINI
I-SIZE with original covers, AIRPADS and side crash
pads. These are key safety components and have been
developed specially for use in the TAKATA MINI I-SIZE.
WARNING!
In order to remove the cover, it is only necessary to
open the buckle and to pull the tongues out. It is not
required to take apart the harness system.
[MINI_I-SIZE_060] Should you have unintentionally
disassembled the harness system, please ensure that,
after threading the shoulder straps back into the back
plate, the straps are not twisted or tangled in the belt
connection section of the central pull strap on the
underside of the TAKATA MINI I-SIZE.
WARNING!
[MINI_I-SIZE_061] Always ensure that the AIRPADS
are positioned correctly in the inner pockets of the
adjustable inner padding and that the strap system is
fully functional and properly set-up.
WARNING!
Check that the TAKATA MINI I-SIZE has not been
damaged. Should you have any queries on this matter,
please contact TAKATA customer services. Failure
to observe this notice may seriously risk your child's
safety in the event of an accident.
de
en
fr
it
es
nl
77