TAKATA MINI I-SIZE Instructions Manual page 66

across your child's stomach, there is a risk of internal
injuries in the event of an accident.
Ensure that the cushion behind the buckle has not
slipped out of place, so that it no longer protects your
child against the buckle's plastic components.
Step 4 – Tighten the straps
[MINI_I-SIZE_037] To tighten the straps, pull the end
of the central pull strap forwards (not up or down).
CAUTION!
You can ensure that the belt tension is correct if only
RQH ¿QJHU ¿WV EHQHDWK WKH VKRXOGHU VWUDSV RI WKH 7$.$7$
MINI I-SIZE after tightening them.
Step 5 – Check the side crash pads (AIRPADS)
WARNING!
[MINI_I-SIZE_021] Always ensure that the AIRPADS
62
are positioned correctly in the inner pockets of the
adjustable inner padding. Failure to observe this notice
may seriously risk your child's safety in the event of
an accident.
Step 6 – Check the size of the seat
WARNING!
[MINI_I-SIZE_038] Before every use, check that your
child's head is fully covered by the side bolsters of the
TAKATA MINI I-SIZE, all the way to the top. If the
head is not fully protected, your child is at greater risk
in an accident. Once your child becomes too tall for
the TAKATA MINI I-SIZE, we recommend switching
to the next seat up, the TAKATA MIDI I-SIZE with
the TAKATA I-SIZE BASE.
Checklist – securing your child:
Please ensure that: