Plug-In Manager - Yamaha 9000 Pro Owner's Manual

Plug-in Voices
Plug-in Voices

Plug-in Manager

This function lets you manage the Plug-in Voice related parameters as disk files.
The following three types of parameters (described in the illustration on page 64) are
available:
Plug-in Custom Voices
Native System Parameters
Board Custom Voices
Basic Procedure
1
Select a Plug-in Voice
category.
2
Select this to call up the
Plug-in Manager display.
The operations for each function corresponding to step #4 are covered in the following
explanations.
I Load Plug-in Custom Voice..........................................................................................
The explanations here apply to step #4 above.
G All
The three types of parameters explained in the chart above can all be loaded together. Use
the instructions here for loading in step #3 of the Quick Guide on page 42.
If an optional SCSI device is connected
or the optional internal hard disk is
installed, select the appropriate device.
See page 150 for details.
66
Reference
These can be edited via the Plug-in Custom Voice Creator func-
tion (page 102).
These can be edited via the Native System Parameter Edit func-
tion (page 105). Available parameters vary according to the in-
stalled board.
These can be edited via your computer. See pages 100 and 106
for details.
3
Select the desired function.
4
Execute the selected function.
Select this to
display the
property of the
selected file.
PAGE CONTROL
BACK NEXT
Select the file to be loaded.
See page 151 for details on directory/file
selection.
Quick Guide
Step#3 on page 42
PAGE CONTROL
BACK NEXT