(Multi Track Recording); Record Mode - Yamaha 9000 Pro Owner's Manual

Song Creator
Song Creator
Track Setting for Recording (Multi Track Recording)
The explanations here apply to step #5 on page 111.
See page 125.
See "Part Selecting/
Record Selecting" on
page 113.
Select the part for the
corresponding track.
Select this to return to the
TRACK main display.
Set the related parameter.
For details, see below
I Record Mode
• Replace........... Follow the normal recording procedure described in the previous sec-
tion. The only difference is that recording will begin from the measure
specified at the MEASURE SET, and all data from that point to the end
of the song will be replaced by the newly-recorded material.
• Punch In.......... This function allows you to selectively re-record a portion of a song track
(the measures between the specified punch-in and punch-out points).
In the eight-measure example below, measures 3 through 5 are re-recorded.
I Measure Set
• When the RECORD MODE is set to "REPLACE," this parameter specifies the mea-
sure you want to start recording from.
• When the RECORD MODE is set to "PUNCH IN," this parameter specifies the first
playback measure. Be sure to give yourself a few measures "lead-in" prior to the
actual punch-in point.
112
Reference
Recording start
(Punch In)
1 2 3 4
1 2 3 4
Previously Newly played data
played data
Select the desired menu.
See "Delete" on page 113.
Set the desired track to "REC."
Select "REC MODE" which appears when
selecting "CURRENT SONG" in step #3.
Available when "PUNCH IN TRIG-
GER" is set to "AUTO SET."
Recording stop
(Punch Out)
5 6 7 8
5 6 7 8
Previously
played data
No data
Muted track
Play track
Record track
• Punch In recording has
another exceptionally conve-
nient advantage — it automati-
cally records any panel
settings you've made, allowing
you to have various settings
(such as voice, volume, pan,
etc.) change instantly and
automatically right before the
Punch In point!