Style Manager - Yamaha 9000 Pro Owner's Manual

Auto Accompaniment
Auto Accompaniment

Style Manager

The 9000Pro styles are divided into two groups : Preset styles and Flash styles.
Flash styles pre-recorded to Flash styles I through VIII can be replaced by the desired data
with the Style Manager function.
Since all Flash style data is stored to Flash ROM, any data in the selected Flash style location will be erased and replaced by
your new settings. This includes the factory programmed Flash style data (Flash styles I through VIII). If you've deleted the
factory-set data, you can use the Restore function (page 154) to load a copy of it from the included disks (page 6).
For details about Flash ROM, refer to "Memory Structure" on page 54.
Basic Procedure
1
Select a style
category.
The operations for each function corresponding to step #4 are covered in the following expla-
nations.
I Load Style into Flash ROM
This allows you to load style data from disk to Flash ROM.
Choose one of the three methods
for selecting files (see page 151).
If an optional SCSI
device is connected or
the optional internal hard
disk is installed, select
the appropriate device.
See page 150 for details.
74
Reference
Save
Flash Styles
in
Flash ROM
Load
Style Manager
2
Select this to call up the
Style Manager display.
Select this to display the property of
the selected file.
Select this to listen to the selected
style file.
When set to "with OTS", you can
load the selected style file with its
One Touch Setting setups.
See page 151 for details
on directory/file selection.
Disk Styles
3
Select the desired function.
4
Execute the selected function.
PAGE CONTROL
BACK NEXT
You can select the desired location
in Flash ROM as the destination.
See "CAUTION" on page 151.