Yamaha 9000 Pro Owner's Manual page 39

6
Press the [NEXT] button.
7
Set up for recording.
• Select the required voice(s), select a style, if required. Set up all parameters
as desired for recording.
• Turn the metronome on or off as required.
PAGE CONTROL
BACK NEXT
8
Start recording.
You can start recording with one of the following ways:
• Press the [START/STOP] button to start the rhythm parts of the accompa-
niment and recording at the same time.
• Press the [SYNC START] button to enable synchronized standby, then play
a key on the left side of the split point to start the accompaniment and
recording at the same time.
• Press the [SYNC START] button to enable synchronized standby.
1) Play a key on the right side of the split point to start recording.
2) Play a key on the left side of the split point to start the accompaniment.
9
Stop recording.
When you finish playing, press the [START/STOP] button.
If you have set the accompaniment tracks to REC in step #5 above, you can
stop recording by pressing the [ENDING] button. If you press the [ENDING]
button, recording will stop automatically after the ending section has finished.
10
Press the [START/STOP] button to hear your newly
recorded performance.
Repeat step #5 - #9 as needed.
11
Save the recorded data to the disk.
Insert a blank recordable disk into the disk drive, and follow the instructions in
the illustration below.
PAGE CONTROL
BACK NEXT
12
Press the [EXIT] button to exit from the Record mode.
F
G
Turn the metronome
H
on or off as required.
I
J
Press this button to
execute the save oper-
ation.
Song Creator
Song Creator
• Pressing the [REHEARSAL]
LCD button before recording
lets you practice the part to be
recorded. This is particularly
convenient for mastering parts
for punch-in recording —
before you actually record
them.
• If one of the TR11~16 is set to
"REC" in step #5, you can start
recording your keyboard per-
formance first and then start
recording the Auto Accompani-
ment or rhythm.
To do this,
1) Press the [RUBATO] LCD
button.
2) Play a key on the right side
of the split point to start
recording your keyboard
performance.
3) Play a chord on the left side
of the split point to start
recording the Auto Accom-
paniment with your key-
board performance.
• Using Registration Memory
(page 28), One Touch Setting
(page 24), and Music Data-
base (page 26) can make your
recording sessions much more
efficient, since various settings
(such as voices, etc.) can be
recalled by a single button
press.
CAUTION
• While the file is being saved,
never eject the floppy disk or
turn the power off.
CAUTION
• Please note that the
recorded data will be lost if
exiting from the Record
mode without saving the
data to disk.
39