Yamaha 9000 Pro Owner's Manual page 120

Song Creator
Song Creator
I Entering other events (Event List)
In addition to Note on/off, the following events can be recorded in the Event List display.
G Conductor Track:
• Tempo
• Time Signature
• End Mark
• System Exclusive (XG parameters)
• System Exclusive (others) *
• Meta Event *
G Tracks 1 through 16:
• Note on/off ........................ Messages which are generated when the keyboard is
• Control Change................. Controller settings such as volume, pan (edited via the Mix-
• Program Change............... Voice selecting
• Pitch Bend ........................ Bends the pitch of notes up or down.
• Channel Aftertouch ........... Applies aftertouch to all notes.
• Polyphonic Aftertouch ....... Applies aftertouch to a single note.
When this is set to on (highlighted), you can play only the current recorded track.
Select the track to be edited.
This shows the current position at which you
edit the event.
Clock: 384 clocks per 1/4-note.
Beat: 1 - 4 (for 4/4 time)
Measure number
Moves the cursor upward/downward. Keep in mind that moving the
cursor away from the just-edited value automatically enters that value.
Instantly returns to the first beginning of the current
recorded song (i.e. the first beat of the first measure).
120
Reference
played. Each message includes a specific note number
which corresponds to the key which is pressed, plus a veloc-
ity value based on how hard the key is played.
ing Console), etc.
Press this to add a new event to the
Event List.
Press this to actually delete the
event at the current cursor position.
If the value at the cursor has been
changed, pressing this restores the
original value.
Adjust the event value finely.
Adjust the event value coarsely.
Moves the cursor leftward/rightward. Keep in mind
that moving the cursor away from the just-edited
value automatically enters that value.
Determines the method of event selec-
tion: single or multiple.
Press this to cut all the selected events
and copy them to the clipboard.
Press this to copy all the selected
events to the clipboard.
Press this to paste all the event data
that is currently contained in the clip-
board.
* These are displayed only and cannot be edited.
• To actually enter an edited
value, move the cursor away
from the value or press the
[START/STOP] button to start
playback.