Table of Contents
Advertisement
Using Features
Park
When transferring a call, you may find that your co-worker
can't be located. Use Park to hold the call and use Paging to
announce the call over your co-worker's speakerphone or
over the building's loudspeaker system. (For more information,
see Paging earlier in this chapter.)
When you park a call, you put it on hold so it can be answered
from any phone in the system. Calls can be parked at your
extension or at a specific Park zone. (You cannot park a call at
a Park zone where another call is parked.)
Your co-worker can then pick up the call from the nearest
phone by using Pickup and dialing the extension you
announced. If the call is not picked up after a set time, it
returns to your console.
Park can be used with a programmed Park or Park Zone
button.
Park zone extensinos and Paging must be
programmed system-wide.
Must have Park zone extensinos, Speakerphone
Paging group numbers and/or Loudspeaker Paging
access code numbers.
4-34 P a r k
Advertisement
Chapters
Table of Contents
