AT&T MERLIN LEGEND MLX- 10D Operator's Manual page 89

Communications system direct-line consoles
Table of Contents

Advertisement

Using Features
To Use Send/Remove Message with a DSS
1. Press Message Status button.
The green light next to the button goes on.
2. Check red light next to DSS button for the extension.
If red light is on, co-worker has an operator message. If red light is off co-
worker does not have an operator message.
To leave message light unaffected and return to call handling,
press Message Status button.
To turn message light on or off, press Send/Remove Message
button, or press Feature and dial 38, and then press DSS
button for the extension. Press Message Status button to
return to call handling.
If co-worker's message light was on, it goes off. If co-worker's
message light
To Use Send/Remove Message with Auto Dial
1.
Check the red light next to Auto Dial button for extension.
If red light is on, co-worker has an operator message. If red light is off, co-
worker does not have an operator message.
To turn message light on or off, press Send/Remove Message,
2.
or press Feature and dial 38, then press Auto Dial button for
extension.
If co-worker's message light was on, it goes OK If co-worker's message
light was off, it goes on.
To Use Send/Remove Message Without a DSS or
Auto Dial
1. Press Send/Remove Message, or press Feature and dial 38.
2. Dial co-worker's extension.
4-26 Messaging
was off,
it goes on.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MERLIN LEGEND MLX- 10D and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Merlin legend mlx- 28dMerlin legend mlx- 20l

Table of Contents