AT&T MERLIN LEGEND MLX- 10D Operator's Manual page 93

Using Features
To Program a Night Service Button
1. Label button to be programmed as Night Service.
2. Press Menu.
3. Select Ext Program[Prog].
If this feature is not displayed, press More.
4. Select
Start.
Press button you labeled Night Service.
5.
6. Select
ListFeature[List].
7. Select
Night Srvc[Night].
If this
feature is not displayed, use FindFeature[Find] or press More.
8. Press Home.
To Use Night Service
1. Press Night Service button.
When a password is not required, the green light next to the button goes
on when Night Service is on, and off when Night Service is off. When a
password is required, the green light flashes.
2. Dial password, if required. See Note.
Note: You must complete password within 60 seconds or start
procedure again. If you make a mistake when entering a
password, the green light returns to its previous state.
4-30 Night Service