AT&T MERLIN LEGEND MLX- 10D Operator's Manual page 71

Using Features
To Program an Account Code Entry Button
1. Label button to be programmed as Account Code.
Press Menu.
2.
3. Select Ext Program[Prog].
If this feature is not displayed, press More.
4. Select Start.
5. Press button you labeled Account Code.
Select ListFeature[List].
6.
7.
Select
AccountCode[Acct].
If this feature is not displayed, use FindFeature[Find] or press More.
Press Home.
8.
To Enter an Account Code Before a Call
1. Press programmed Account Code button, or press Feature and
select AccountCode[Acct]. See Notes.
The display prompts you to enter an account code.
2. Dial account code, followed by #. See Notes.
3. Press any SA or line button.
Lift
4. handset, press Speaker, or use headset.
5. Dial phone number (including dial-out code if using SA button).
Notes:
For step 2, program an outside Auto Dial button with an
account code followed by a #, and press the button
whenever you need to enter the code. See "Auto Dial."
If using account codes on a conference call, follow steps
and press Conf. When adding participants, repeat
1–5
steps 1, 2, 3, and 5 and press Conf again.
4-8 Account Code Entry