Using Features
Headset Features
If you
want to use a headset,
programmed on your console: Headset Status, to turn the
headset on and off, and Headset Hang Up, to disconnect
calls. You do not need to program a Headset Status button
unless you are going to use both the headset and the
handset. You can program Headset Status but the Headset
Hang Up button must be programmed by your system
manager.
You can program the console with a Headset Auto Answer
button to automatically deliver calls to the headset, so that you
don't need to press line buttons to answer calls. As each call
comes in, you hear atone and you can begin speaking
immediately after it.
Headset/Handset Mute temporarily turns off the microphone
in your headset or handset so that you can talk with someone
in your office without being heard by a caller.
Must have a prgrammed Headset Hang Up button on
console.
4-20 Headset Features
you need two feature buttons
Need help?
Do you have a question about the MERLIN LEGEND MLX- 10D and is the answer not in the manual?