Before You Go To The Installation Site; Other Documents; License File, Software, And Firmware - Avaya G700 Quick Start For Hardware Installation

1
Before You Go to the Installation
Site
The following activities must be completed before going to an installation site.

Other documents

Obtain access to the following documentation:
•
The G700/S8300 Installation guide: Installation and Upgrades for Avaya G700 Media Gateway
and Avaya S8300 Media Server, 555-234-100.
•
The documentation library on CD, installed on your laptop, or accessible from the Avaya Support
web site: Documentation for Avaya Communication Manager, Media Gateways and Servers,
555-300-151.

License file, software, and firmware

The following tasks must be completed before you can install an Avaya S8300 Media Server and Avaya
G700 Media Gateway.
1
Meet with the customer to complete the Electronic Preinstallation Worksheet. The Electronic
Preinstallation Worksheet contains specific information about the customer's network
configuration and telephony requirements. This information is required to use the Avaya
Installation Wizard to configure the Avaya IP solution.
NOTE:
To use the Avaya Installation Wizard, Release 2.0 or later of the Communication Manager
must be installed on the media server. If a pre-2.0 release of the Communication Manager
is installed on the media server, the software must be upgraded before the Avaya
Installation Wizard can be used.
NOTE:
The current release of the Avaya Installation Wizard supports only an English-language
operating system.
2
If you are using the Avaya Installation Wizard to generate basic translations on an S8300 primary
controller in a G700, get the customer's Name and Number list file and the Custom Templates.
Copy these files to your laptop. The Electronic Preinstallation Worksheet contains instructions for
the Name/Number and Custom Templates files.
Quick Start: G700 and S8300
June 2004

Before You Go to the Installation Site

Other documents
7