Rack Mount Cabinet Installation
. Circuit pack installation
!
Warning: When handling circuit packs or any components of a DEFINITY ONE system,
always wear an authorized wrist ground strap. Connect the strap to the ground
connector provided on the system cabinet. See
!
Note: All of the circuit pack slots in the CMC are "universal slots." Any slot can contain
any type of port circuit pack.
–
Circuit pack slot loading.
• Install the TN795 Processor circuit pack in slot 2 of the cabinet. See
• A TN744D Call Classifier/Tone Detector circuit pack is required. Slot 3 is
preferred.
• Load all port circuit packs. See the table in the IP600 installation manual for
recommended layout.
Avaya IP600
Figure 13
.
Figure 13
–EXIT
10