Switching The Conference System On/Off - Sennheiser ADN Series System Instruction Manual

Putting the conference system into operation
ADN CU1
ADN CU1
1
ADN PS
3
4
2

Switching the conference system on/off

The ADN PS power supplies and the ADN-W AM antenna module can only
be switched on when the central unit ADN CU1 and the previous ADN PS
connected in series are also switched on.
ADN CU1
ADN CU1
ON
You can set up your conference system so that you can increase or reduce
the number of wired conference units used by simply switching individual
ADN PS on or off. The ADN-W AM antenna module allows you to expand the
conference system with additional wireless conference units.
Switching on a conference system comprising wired conference units
On the ADN CU1 central unit and the ADN PS power supplies, set the on/off
1 2
switch or
The central unit switches on and its display panel lights up. The power supplies
ESC
switch on and their status LEDs light up:
Status LED
5
POWER
3
PORT I /Port II
output 1/2
5
When switching the conference system on the first time, select the desired
language (see page 113). This manual shows screenshots of the English-
language version of the central unit's operating menu.
ADN PS
ON
ESC
ADN-W AM
ON
to position "I".
Color Meaning
green ADN PS is switched on
4
– not used, switched off
orange conference units are connected in strings
green conference units are connected in redundant
ring topology via output 1 and 2
flashing error in a cable string,
orange output is switched off
ADN Digital Conference System
ADN PS
ON
| 77