Adding Conference Units To The Conference System During Operation - Sennheiser ADN Series System Instruction Manual

Running a conference
Direct Access 310 D1/C1
20
Open access mode
Closed access mode
Adding conference units to the conference system
during operation
You can add conference units to the conference system during operation. The num-
ber of ADN C1 or ADN-W C1 chairperson units is limited to 10 max. (see page 28).
When adding conference units to the conference system, the
I
appear on the display panel of the ADN CU1 central unit. Added conference units
appear on the display panel of the central unit
Manager" software (see page 213).
Adding wired conference units
• When adding conference units to the conference system, observe the
maximum number of conference units in order to ensure operational
reliability (see page 29).
• If you are operating more than 75 conference units or if your conference
units are installed in rooms with obstacles, we recommend using
several antenna modules (see page 32).
The delegate units are ready for immediate use. The chairperson units have to
be re-initialized. Note that this will interrupt the conference (see page 94 or page
191).
Adding wireless conference units
If you are in open access mode
you can simply add additional wireless conference units to the conference system.
Once the conference units are switched on (see page 78), they are automatically
initialized. After approx. 10 seconds, the conference units are ready for operation.
The wireless chairperson units have to be re-initialized. Note that this will interrupt
the conference (see page 94 oder page 191).
If you are in closed access mode
tional wireless conference units to a running conference using the "Conference
Manager" software. In order to be able to use these additional wireless conference
units, they have to be manually logged in to the antenna module (see "Manually
logging in the wireless conference units (closed wireless conferencing) – "Access
Mode - Closed"" on page 167).
I
and are listed in the "Conference
("Access Mode - Open") (see page 96 or page 166),
("Access Mode - Closed"), you can only add addi-
ADN Digital Conference System
"Processing ..." bar
| 121