How To Install The Product On A Din Rail; How To Remove The Product From A Din Rail - ABB Ability Naveo Pro GW 1.0 Operation Manual

I N S TA L L AT I O N
—
8 Installation
8.2
To install the product on a horizontal DIN rail, complete the following steps:
1. Hook the lower mobile latches of the DIN Rail Mounting Clip on the lower edge of the DIN rail
2. Push the product against the DIN rail. The upper latches of the DIN Rail Mounting Kit are locked on
the DIN rail.
—
1
8.3
To remove the product from a horizontal DIN rail, complete the following steps:
1. Push upwards the lower mobile latches of the DIN Rail Mounting Clip. The lower latches are
released from the DIN rail
2. Pull the product out
—
1

How to install the product on a DIN Rail

How to remove the product from a DIN Rail

—
2
—
2
27