Ghz Tx Output Power; Bluetooth Specifications; Ble Specifications; Antennas Connectors Specifications - ABB Ability Naveo Pro GW 1.0 Operation Manual

I N T E R FA C E S I N D E TA I L
—
6 Interfaces in detail

6.1.1.2 5 GHZ TX output power

Maximum RMS output power measured at 1dB from IEEE spectral mask or EVM.
Parameter
Operation frequency range
Output Power

6.1.2 Bluetooth specifications

• Supports Bluetooth 4.2
• Includes concurrent operation and built -in coexisting and prioritization handling of Bluetooth,
BLE, audio processing and WLAN
• Dedicated Audio processor supporting on chip SBC encoding + A2DP:

6.1.3 BLE specifications

• Fully compliant with BT and BLE dual mode standard
• Support for all roles and role-combinations, mandatory as well as optional
• Supports up to 10 BLE connections
• Independent buffering for LE allows having large number of multiple connections without
affecting BR/EDR performance

6.1.4 Antennas connectors specifications

Specifications are the same for both the following antennas connectors:
• 2.4 GHz Wi-Fi / Bluetooth
• 5 GHz Wi-Fi
Antennas Connector
—
1 Male inner pin contact
—
2 Female connector
body (outer thread)
Value
5150 to 5250MHz
16.8 dBm @ condition: 6 Mbps OFDM
- Assisted A2DP (A3DP) support - SBC encoding implemented internally
- Assisted WB-Speech (AWBS) support - modified SBC codec implemented internally
Connector Specifications:
• RP-SMA connector
2
• Gender: Female
1
Mating Connector Specifications:
• RP-SMA connector
• Gender: Male
23