Power; How To Supply Power To The Product; Power Supply Specifications; Power In Connector And Mating Connector Specifications - ABB Ability Naveo Pro GW 1.0 Operation Manual

P O W E R
—

9 Power

9.1 How to supply power to the product

This product is not provided with any ON/OFF switch.
In order to disconnect the power, please simply remove the power supply connector from the Gateway.

9.2 Power supply specifications

Power supply
Power consumption
Peak demand

9.2.1 Power IN connector and mating connector specifications

The power input is protected against: surge, noise, reverse polarity, over-voltage
NOTICE
The Power IN connector is NOT protected against short circuit.
Always include an external fuse to protect the product!
The Naveo®Pro Gateway provides the Power IN connector on the rear side.
Pin
1
2
3
Nominal: 12 or 24 VDC; Range: 9 to 30 VDC with transient protection
4 W typical; 15 W maximum
< 15 W
1 2 3
Signal
Power IN +
Power IN -
NC
Connector Specifications:
• Base strip, Header
• Gender: Male
• Type: 3-pin, 3.5 mm pitch
Mating Connector Specifications:
• Pluggable screw terminal block
• Gender: Female
• Type: 3-pin, 3.5 mm pitch
• Example:Part Number: MC 1,5/
3-STF-3,5 - 1847068 (or
equivalent)
Type Description
P Positive power supply input (LIVE)
P Negative power supply input (NEUTRAL)
NC Not Connected
29