Interfaces In Detail; Wi-Fi And Bluetooth; Wi-Fi Specification; Ghz Tx Output Power - ABB Ability Naveo Pro GW 1.0 Operation Manual

22 A B B A B I L I T Y ™ N AV E O ® P R O G AT E W AY
—

6 Interfaces in detail

6.1 Wi-Fi and Bluetooth

The Naveo®Pro Gateway provides the following Wi-Fi / Bluetooth function:
• 2.4 GHz Wi-Fi 802.11a,b,g,n / BLE 4.2 BLE Bluetooth
• 5 GHz Wi-Fi 802.11a,b,g,n
The internal circuitry allows for 2.4 GHz Wi-Fi and Bluetooth coexistence. The antennas connectors are
placed on the front side.
6.1.1 Wi-Fi specifications
• Integrated 2.4 & 5G GHz Power Amplifier (PA) for WLAN solution
• WLAN Baseband Processor and RF transceiver supporting IEEE Std 802.11a/b/g/n
• WLAN 2.4/5 GHz SISO (20/40 MHz channels)
• Baseband Processor
• Fully calibrated system. Production calibration not required
• Medium Access Controller (MAC)
• IEEE Std 802.11d,e,h,i,k,r PICS compliant
• New advanced co-existence scheme with BT/BLE
• 2.4/5 GHz Radio
• Supports 4 bit SDIO host interface, including high speed (HS) and V3 modes.

6.1.1.1 2.4 GHz TX output power

Maximum RMS output power measured at 1dB from IEEE spectral mask or EVM.
Parameter
Operation frequency range
Output Power
- IEEE Std 802.11a/b/g/n data rates and IEEE Std 802.11n data rates with 20 or 40 MHz SISO
- Embedded ARM™ Central Processing Unit (CPU)
- Hardware Based Encryption/Decryption using 64 , 128 , and 256 Bit WEP, TKIP or AES Keys
- Supports requirements for Wi-Fi Protected Access (WPA and WPA2.0) and IEEE Std
- 802.11i (includes hardware accelerated Advanced Encryption Standard (AES))
- Designed to work with IEEE Std 802.1x
- Internal LNA and PA
- Supports: IEEE Std 802.11a, 802.11b, 802.11g and 802.11n
Value
2400MHz to 2483.5MHz
17 dBm @ condition: 1 Mbps DSSS