Table of Contents
Advertisement
Assembly
CAUTION!
Do not turn the shaft after loosening the screws.
3.2.5
Remove the screws for the pillow block
of the handwheel.
CAUTION!
Always fasten the screws uniformly so that the housing will not jam.
3.2.6
Assemble housing (No. 2) with screws
(No. 10).
3.2.7
The two supporting bushings (No. 4)
need to be inserted between the hou-
sing and the pillow block. The smaller
diameter of the supporting bushing
needs to be oriented to the machine!
3.2.8
Mount the step motor as described under
3 / 08 / 2006
pillow block of the
pillow block
support bushing
"Installation of step motors" on page 19.
Assembly Adapter kit BF20 Vario; BF20L Vario ; Version 1.4.7
OPTIMUM
M A S C H I N E N - G E R M A N Y
handwheel
screws
Fig.3-12: Remove screws
housing
Fig.3-13: Assembly housing
Page 11
Hide quick links:
Advertisement
Table of Contents
