Chapter 6: Wireless Communication, Meter Pairing, And Data Transfer - Accu-Chek Guide Me User Manual

6
Wireless Communication, Meter Pairing, and Data Transfer
Overview
The process of creating a connection
between the meter and the mobile device is
called pairing. You will need an application
on your mobile device that can accept the
meter's data. You can use this application to
wirelessly and automatically synchronize
your diabetes information between the
meter and the mobile device.
Pairing
The meter can only pair with 1 device at a
time. Pairing with a second device
overwrites the first pairing.
The meter and the device to be paired
should be within 3 feet of each other.
1
On Your Mobile Device
Ensure Bluetooth is on and open the
diabetes management app.
2
On Your Meter
appear and flash on the display.
Locate the 6‑digit PIN on the back of your
meter.
3
On Your Mobile Device
Within the app, follow the instructions
and select your meter. When prompted,
enter the meter's 6‑digit PIN.
The meter times out after 30 seconds
once you are prompted to enter the PIN.
24
With the meter off,
press and hold
and at the same
time until appears.
Both and
6‑digit PIN