Transferring Data Wirelessly; Turning Bluetooth Off; Turning Bluetooth On; Transferring Data Using A Usb Cable - Accu-Chek Guide Me User Manual

6
Wireless Communication, Meter Pairing, and Data Transfer
4
On Your Meter
OK appears if pairing is successful. Err
appears if pairing is unsuccessful.
NOTE
The meter has time and date auto‑sync
capability when paired with a mobile
device that will update the meter time and
date automatically. Even if you use your
meter in multiple time zones, results are
stored from newest to oldest and not by
time and date.

Transferring Data Wirelessly

If the meter is paired with a mobile device
and Bluetooth is on, your test results will be
automatically sent to the paired device.

Turning Bluetooth Off

Turn Bluetooth off to disable wireless
communication (flight mode). Turning
Bluetooth off will not unpair your meter.
1
or
With the meter off,
press or . The
last stored test result
appears on the
display.
2

Turning Bluetooth On

If you have turned Bluetooth off (flight
mode), follow the steps below to turn it
back on. This will enable wireless
communication with your mobile device.
1
2
Transferring Data Using a USB
Cable
This feature allows you to transfer data
from your meter to special software for
diabetes management on a PC using a USB
cable.
25
Press and hold
until the Bluetooth
symbol disappears.
With the meter off,
press or . The
last stored test result
appears on the
display.
Press and hold
until the Bluetooth
symbol appears.