Chapter 5: Meter Memory, Setup, And Data Transfer - Accu-Chek nano 48210 Owner's Booklet

5
Meter Memory, Setup, and Data Transfer
Storing Blood glucose and Control results
The meter automatically stores up to 500 blood glucose results with the time and date of the test result and
any test result marker which you can review at any time. Test results are stored from the newest to the oldest,
so set the time and date correctly in the meter. Having the correct time and date setting helps ensure
appropriate interpretation of stored blood glucose results by you and your healthcare team.
NOTE
• The memory is not lost when the batteries are replaced; however, confirm that the time and date are still
correct. See Chapter 5, Setting the Time and Date.
• Once 500 blood glucose or 20 control results results are in memory, adding a new result causes the oldest
one to be deleted.
• If more than 500 blood glucose tests are performed within a 90-day period, only the most recent 500 test
results are included in the 90-day average.
• The control results are stored in memory, but cannot be reviewed on the meter. To view stored control
results, first transfer them to a compatible software application. For product availability, contact the
ACCU-CHEK Customer Care Service Center at 1-800-858-8072.
• Control results are not included in the 7-, 14-, 30-, and 90-day averages.
• Only test results that have been assigned a pre-meal or post-meal marker are included in pre-meal and
post-meal averages. All blood glucose results are included in the general 7-, 14-, 30-, and 90-day averages.
24