Scanning With The Twain Interface; Basic Steps To Open The Twain Interface; To Scan With The Twain Interface - Xerox DocuMate 632 User Manual

Scanning with the TWAIN Interface

Basic Steps to Open the TWAIN Interface

To scan with the TWAIN Interface:

82
Scanning with the TWAIN
Interface
In addition to using the One Touch Button Panel to scan, you can
also scan using the TWAIN interface. Many applications can use
TWAIN for scanning.
A Note About Your Scanner and the TWAIN standard: TWAIN is
a widely recognized procedure that computers use to receive
images from scanners, digital cameras, and other digital devices.
Because the TWAIN interface is essentially the same regardless of
the software you use to open it, you can still use the instructions in
this User's Guide for scanning with your Xerox DocuMate 632
scanner. The steps below show the basic process to open the
TWAIN interface, but to open it in specific software applications
please refer to their user's guides, then return to this User's Guide
for the steps to scan.
NOTE: If the OneTouch configuration you are using to scan is
set to Configure Before Scan, and the selected option is
TWAIN, the TWAIN interface opens right away. You don't need
to open it from another application as explained in the following
steps.
Each TWAIN-compliant software application has its own specific
steps to open the TWAIN interface, but the basic process is the
same for most of them.
1. Open an application that is TWAIN-compliant.
Applications that are TWAIN-compliant include Microsoft
PowerPoint and Microsoft Word, and many other graphics
applications and word processing applications.
DocuMate 632 Scanner User's Guide