Scan From The One Touch Button Panel - Xerox DOCUMATE 252 User Manual

Scanning

Scan from the One Touch Button Panel

The One Touch Icon.
28
You can scan from the One Touch Button Panel on the screen.
1. Adjust the paper guide for the width of paper and load the
documents with their tops into the Automatic Document
Feeder.
For Simplex (one-sided) scans, load the documents face down.
For Duplex (two-sided) scans, the documents can be face up or
down because both sides are scanned.
2. Now click on the One Touch icon in the Windows Notification
Area (at the bottom right corner of the screen).
The One Touch Button Panel opens and shows the first five on-
screen scanning buttons. Click the arrows to cycle through all 9
settings.
3. On the screen—not on the scanner—click the button you want
to use to scan.
NOTE: The One Touch Properties window must be closed
before you can scan from the Button Panel.
For example, if you want to scan
with button 2, which converts the
document to PDF, click here.
NOTE: Your scanner comes with 9 factory-preset One Touch
button settings. You can reconfigure and rename all the buttons.
The scanner begins scanning. When the process finishes, the
scanned images appear in the Destination Application, just as if
you scanned with the Simplex or Duplex scanner buttons.
Click the button you
want to use to scan.
Or if you want to scan with button 4, which
attaches the scanned document to a
blank email message, click here.
DocuMate 252 Scanner User's Guide
Click these arrows
to navigate through
the 9 buttons.