Ebotics Code & Drive User Manual page 22

BUILD & CODE 4IN1 BOARD TECHNICAL SPECIFICATIONS
• Build & Code 4in1 (Microcontroller ATmega328P)
• Operating Voltage: 5V
• Input Voltage (recommended): 7-12V
• Input Voltage (limit): 6-20V
• 12 Digital I/O Pins
• 7 PWM Digital I/O Pins
• 6 Analog Input Pins
• DC Current per I/O Pin: 20 mA
• Clock Speed: 16 MHz
• Connectivity Bluetooth 2.0
• Direct connection to DC motors
• Size: 68 x 53 mm
• Weight: 25 g
• Programmable with Arduino IDE, the visual programming software by blocks compatible
(Scratch 2.0) and BitBloq platforms
• Compatible with Mac OS, Windows and Linux
INCLUDED PIECES
1
Build&Code 4in1
40 Screws M3*12
6 Screws M3*30
30
Nuts M3
35 Nylon spacers M3*3
10 Hexagonal metal female-female spacer M3*25
1
Battery holder for 6 AA batteries
1 Allen wrench M3
2
Analog light sensors
2
Line-follower sensors
1 Red LED
1
Green LED
1 Buzzer
1 Button
1
Ultrasonic sensor
1 Holder for the ultrasonic sensor
2 DC Motors
2
Wheels
1 Ball wheel
1 USB -Micro USB 2.0 cable
1
Screwdriver
BUILD AND CODE THE CODE&DRIVE
To assemble the Code&Drive you will need to build its structure with the included pieces; then
you have to do the cable connection between the sensors, motors and the Build&Code 4in1
board. Finally, you have to code its function and upload it to Build&Code 4in1 board so you can
use the Code&Drive.
CODE & DRIVE MANUAL
22