Printing Envelopes - Xerox Phaser 6300 User Manual

7.
On the control panel, select the transparency type:
a. Select Change
b. Select Transparency, and then press the OK button.
8. In the printer driver, select either Transparency as the paper type or the appropriate tray
as the paper source.

Printing Envelopes

Envelopes can be printed only from Tray 1 (MPT).
See also:
Supported Paper Sizes and Weights for Tray 1 (MPT)
Envelopes Guidelines
■ Use only paper envelopes specified in the Supported Paper Sizes and Weights table.
Successful envelope printing is highly dependent on the quality and construction of the
envelopes. Use envelopes made specifically for laser printers.
■ It is recommended that you maintain constant temperatures and relative humidity.
Store unused envelopes in their packaging to avoid the effects of moisture and dryness
■
which can affect print quality and cause wrinkling. Excessive moisture can cause the
envelopes to seal before or during printing.
■ Avoid padded envelopes; purchase envelopes that lie flat on a surface.
■ Remove air bubbles from the envelopes before loading by setting a heavy book on top of
the envelopes.
■ If wrinkling or embossing problems occur, use a different brand of envelopes made
specifically for laser printers.
Caution:
Never use envelopes with windows or metal clasps; they can damage the printer.
Damage caused by using unsupported envelopes is not covered under the Xerox warranty,
service agreement, or Total Satisfaction Guarantee. The Total Satisfaction Guarantee is
available in the United States and Canada. Coverage may vary outside these areas, please
contact your local representative for details.
setup, and then press the OK button.
Phaser® 6300/6350 Color Laser Printer
3-27
Printing on Specialty Media
on page 3-6