Overview Of Network Setup And Configuration - Xerox Phaser 6300 User Manual
Xerox color laser printer user guide phaser 6300, phaser 6350
Hide thumbs
Also See for Phaser 6300:
- Service manual (555 pages) ,
- User manual (120 pages) ,
- Advanced features manual (98 pages)
Table of Contents
Advertisement
Overview of Network Setup and Configuration
To set up and configure the network:
1.
Turn on the printer and the computer.
2.
Connect the printer to the network using the recommended hardware and cables.
3.
Configure the printer's network address, which is required to identify the printer on the
network.
■
Windows operating systems: Run the Installer on the Software and Documentation
CD-ROM to automatically set the printer's IP address if the printer is connected to an
established TCP/IP network. You can also manually set the printer's IP address on the
control panel.
■
Macintosh systems: Manually set the printer's network address (for TCP/IP) on the
control panel.
4.
Install the driver software on the computer from the Software and Documentation
CD-ROM. For information on driver installation, see the section in this chapter for the
specific operating system you are using.
Overview of Network Setup and Configuration
Phaser® 6300/6350 Color Laser Printer
2-2
Advertisement
Table of Contents
