Printing Labels - Xerox Phaser 6300 User Manual
Xerox color laser printer user guide phaser 6300, phaser 6350
Hide thumbs
Also See for Phaser 6300:
- Service manual (555 pages) ,
- User manual (120 pages) ,
- Advanced features manual (98 pages)
Table of Contents
Advertisement
Printing Labels
Labels can be printed from all trays.
See also:
Supported Paper Sizes and Weights for Tray 1 (MPT)
Supported Paper Sizes and Weights for Trays 2–5
Label Guidelines
■
Do not use vinyl labels.
■
Print only on one side of the sheet of labels.
Do not use any sheet where labels are missing; it may damage the printer.
■
■
Store unused labels flat in their original packaging. Leave the sheets of labels inside the
original packaging until ready to use. Return any unused sheets of labels to the original
packaging and reseal it.
■
Do not store labels in extremely dry or humid conditions or extremely hot or cold
conditions. Storing them in extreme conditions may cause print-quality problems or cause
them to jam in the printer.
■
Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to
curl and jam the printer.
Printing Labels from Tray 1 (MPT)
1.
Open Tray 1 (MPT) by pulling out on the handle.
Phaser® 6300/6350 Color Laser Printer
3-30
Printing on Specialty Media
on page 3-6
on page 3-7
6300-006
Advertisement
Table of Contents
