Common Specifications - Panasonic SF4С Series Instruction Manual

Safety light curtain
Hide thumbs Also See for SF4С Series:
Table of Contents

Advertisement

Specifications and Dimensions

7.2 Common Specifications

Type
Model No.
Sensing range
Beam pitch
Detecting capability (Min.
object to be sensed)
Effective aperture angle
(EAA)
Supply voltage
Control output
(OSSD 1, OSSD 2)
Response time
Auxiliary output
(Non-safety output)
114
SEN TRONIC
AG
Produkte, Support und Service
Cable type
SF4C-H-□
±2.5° or less for sensing range exceeding 3m
(required by IEC 61496-2/UL 61496-2)
24V DC
PNP open-collector transistor/NPN open-collector transistor (switching type)
• For PNP output: Max. source current 200mA
• For NPN output: Max. sink current 200mA
Applied voltage: same as supply voltage (for PNP output: between the control output
(OSSD 1/2) and +V, for NPN output between the control output (OSSD 1/2) and 0V).
• Residual voltage: 2.5V or less (For PNP output: source current 200mA, for NPN
output: sink current 200mA) (when using 10m length cable)
• Leakage current: 200µA or less, when power supply is OFF
• Maximum load capacity: 1µF (no load to maximum output current)
• Load wiring resistance: 3Ω or less
• Operation mode: ON when all beams are received, OFF when one or more beams
are interrupted (Note 1, 2), OFF when fault occurs in the sensor or the
synchronization signal error, too.
Protection circuit: Incorporated
In normal operation: OFF: 7ms or less, ON: 90ms or less
PNP open-collector transistor/NPN open-collector transistor (switching type)
• For PNP output: Max. source current 100mA
• For NPN output: Max. sink current 100mA
• Applied voltage: same as supply voltage (for PNP output: between the auxiliary
output and +V, for NPN output between the auxiliary output and 0V)
• Residual voltage: 2.5V or less (In case of selecting PNP output: source current
100mA, in case of selecting NPN output: sink current 100mA) (when using 10m
length cable)
• Operation mode: When OSSDs are ON: OFF, When OSSDs are OFF: ON (factory
setting). This setting can be changed with the optional handy controller SFC-HC.
Protection circuit: Incorporated
Rugghölzli 2
CH - 5453 Busslingen
SF4C Safety light curtain
Pigtailed type
SF4C-H-□-J05
0,1 to 3m
20mm
Ø25mm opaque object
+10
-15
%. Ripple P-P 10% or less
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents