Wallenstein BXR Series Operator's Manual
  1. Manuals
  2. Brands
  3. Wallenstein Manuals
  4. Chipper
  5. BXR Series
  6. Operator's manual

Wallenstein BXR Series Operator's Manual

Wood chipper
Hide thumbs Also See for BXR Series:
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
BX52R Models – S/N 152R1437 and up
BX72R Models – S/N 172R724 and up
BX102R Models – S/N 1102R510 and up
BXR Series
Wood Chipper
™ TECHNOLOGY
Rev Oct-2022
Document Number: Z97072_En

Advertisement

Table of Contents
loading

Related Manuals for Wallenstein BXR Series

Summary of Contents for Wallenstein BXR Series

  • Page 1 OPERATOR'S MANUAL BX52R Models – S/N 152R1437 and up BX72R Models – S/N 172R724 and up BX102R Models – S/N 1102R510 and up BXR Series Wood Chipper ™ TECHNOLOGY Rev Oct-2022 Document Number: Z97072_En...

  • Page 2: Table Of Contents

    BX52R, BX72R, BX102R Tractor Wood Chipper Table of Contents 1. Foreword ..............3 7.7 Stopping Procedure ............ 50 1.1 Introduction ..............3 7.8 Stopping in an Emergency .......... 50 1.2 Model Configuration ............. 3 7.9 Unplugging the Chipper ..........51 1.3 Delivery Inspection Report ..........4 7.10 Transporting the Chipper ..........

  • Page 3: Foreword

    Congratulations on your choice of a Wallenstein BXR Series wood chipper ! Wallenstein BXR Series wood chippers are designed to chip and chop scrap lumber, small trees, brush, limbs and other wood material. The chipped material is fine enough to be composted or used in a variety of ways.

  • Page 4: Delivery Inspection Report

    Tractor Wood Chipper 1.3 Delivery Inspection Report Wallenstein BXR Series Tractor Wood Chipper To activate warranty, register your product at WallensteinEquipment.com. This form must be completed by the dealer at the time of delivery, and then signed by the dealer and customer.

  • Page 5: Serial Number Location

    BX52R, BX72R, BX102R Foreword Tractor Wood Chipper 1.4 Serial Number Location Always provide the model and serial number of your Wallenstein product when ordering parts or requesting service or other information. The product information plate location is shown in the following illustration.

  • Page 6: Types Of Decals On The Machine

    They can be either vertical or horizontal. Product Decals indicate machine model and serial number, and other important information. Manufactured by: Wallenstein Equipment Inc., 7201 Line 86, Wallenstein ON N0B2S0, Canada MODEL: ########## TYPE OF VEHICLE/TYPE DE VEHICLE: TRA / REM...

  • Page 7: Safety

    YOU are responsible for the SAFE operation and maintenance of DANGER – your Wallenstein product. YOU must make sure that anyone who is going to use, maintain or work around the machine is familiar Indicates an imminently hazardous situation that, if not avoided, with the operating and maintenance procedures and related will result in death or serious injury.

  • Page 8: Equipment Safety Guidelines

    BX52R, BX72R, BX102R Safety Tractor Wood Chipper • Wear the appropriate PPE. This includes but is not limited • Never consume alcoholic beverages or drugs while using this equipment. Alertness or coordination can be affected. Consult your doctor about using this machine while taking - A hard hat.

  • Page 9: Safety Training

    Safety is a primary concern in the design and manufacture of recovery. Wallenstein products. Unfortunately, efforts to provide safe equipment can be wiped out by a single careless act. • Clear working area of stones, branches or hidden obstacles that might be hooked or snagged, causing injury or •...

  • Page 10: Sign-Off Form

    BX52R, BX72R, BX102R Safety Tractor Wood Chipper 2.10 Sign-Off Form The design and manufacture of this product conforms to the applicable provisions in the following standards: Everyone who uses this machine must read and thoroughly • ISO 4254-1:2013, Agricultural machinery - Safety - Part 1: understand all safety, operation, and maintenance information General requirements.

  • Page 11: Safety Signs

    BX52R, BX72R, BX102R Safety Signs Tractor Wood Chipper 3. Safety Signs WARNING! Risk of personal injury. Replace safety signs that are removed, damaged, or illegible. If a part with a safety sign on it is replaced, a new safety sign must be applied.

  • Page 12: Safety Sign Locations

    BX52R, BX72R, BX102R Safety Signs Tractor Wood Chipper 3.1 Safety Sign Locations Numbers correspond with the Safety Sign Explanations on page 14. Fig. 2 – Safety sign locations - left side (BX72R shown)
  • Page 13 BX52R, BX72R, BX102R Safety Signs Tractor Wood Chipper Fig. 3 – Safety sign locations - right side (BX72R shown)

  • Page 14: Safety Sign Explanations

    BX52R, BX72R, BX102R Safety Signs Tractor Wood Chipper 3.2 Safety Sign Explanations 3. CAUTION! Always wear appropriate Personal IMPORTANT! If safety signs have been damaged, removed, Protective Equipment if around this become illegible or parts replaced without safety signs, new machine when it is in operation.
  • Page 15 BX52R, BX72R, BX102R Safety Signs Tractor Wood Chipper 6. CAUTION! 10. WARNING! A noise declaration decal indicates Risk of personal injury. Operate chipper the sound power (LWA) emitted by the at the correct PTO speed and direction. machine when operating. For this chipper, Tractor PTO must operate at 540 or 1000 it can be up to 121 decibels at close rpm, rotating in the direction of the arrow.

  • Page 16: Replace Damaged Or Missing Safety Signs

    Replacement safety signs are available from your authorized distributor, dealer parts department, or Wallenstein Equipment. • Keep the safety signs clean and legible at all times. • Parts replaced that had a safety sign (decal) on them must also have the safety sign replaced.

  • Page 17: Familiarization

    BX52R, BX72R, BX102R Familiarization Tractor Wood Chipper 4. Familiarization 4.1 To the New Operator or Owner 4.2 Operator Orientation It is the responsibility of the owner or operator to read this IMPORTANT! The directions for left-hand, right-hand, manual and to train all other operators before they start working backward, and forward mentioned throughout this manual with the machine.

  • Page 18: Machine Components

    BX52R, BX72R, BX102R Familiarization Tractor Wood Chipper 4.3 Machine Components 00808 Fig. 5 – Components (Typical) 1. Discharge Chute 8. Return Hose 15. Feed Roller Control Bar 2. Discharge Chute Deflector 9. Power Take Off (PTO) Shaft 16. Detent Reset 3.
  • Page 19 BX52R, BX72R, BX102R Familiarization Tractor Wood Chipper 00809 Fig. 6 – Components (Typical) 1. Rotor Lock 5. Ledger Knife 8. Lower Roller Clean out 2. Twig Breaker 6. Ledger Setting Gauge 3. Rotor 7. Toplink Storage Position (BX102R 4. Rotor Knife models)
  • Page 20 BX52R, BX72R, BX102R Familiarization Tractor Wood Chipper 00807 Fig. 7 – Winch and Hydraulic Feed Roller Lift Options (BX102RP only) 1. Hydraulic Winch 5. Lift Cylinder Locking Pin 2. Hydraulic Winch Control Valve 6. Feed Roller Lift Cylinder 3. Winch Gear Engage-Disengage Lever 4.

  • Page 21: Attach To A Tractor

    BX52R, BX72R, BX102R Attach to a Tractor Tractor Wood Chipper 5. Attach to a Tractor Make sure there is enough room and clearance to safely reverse 5.1 Connect 3-point Hitch to the chipper. Procedure WARNING! 1. On the tractor, place the 3-point hitch lift arms in their full Never let anyone stand between the tractor and sway position, then reverse the tractor up to the chipper.

  • Page 22: Size Pto Shaft

    BX52R, BX72R, BX102R Attach to a Tractor Tractor Wood Chipper 5.2 Size PTO Shaft 4. Pull the PTO shaft apart and place one end on the tractor output spline. Place the other on the implement input. IMPORTANT! The PTO shaft that came with your machine Illustrations show a winch;...
  • Page 23 BX52R, BX72R, BX102R Attach to a Tractor Tractor Wood Chipper 6. Using a straight edge, transfer a mark from the end of one 9. Using the cut-off length of plastic tube as a guide, mark the tube section to the other section as shown. steel tube.
  • Page 24 BX52R, BX72R, BX102R Attach to a Tractor Tractor Wood Chipper 15. Make sure the shaft can telescope freely before installing. If 4. If the collapsed length A is longer than measurement B from it does not, separate the two parts and inspect for burrs or Step 3, the PTO shaft must be shortened.

  • Page 25: Install A Pto Shaft

    BX52R, BX72R, BX102R Attach to a Tractor Tractor Wood Chipper 5.3 Install a PTO Shaft 4. To check that the shaft lock is fully seated, pull back on the shaft with your hands off the button. The implement must be mounted to the tractor, and fully lowered 5.

  • Page 26: Connect Hydraulic Hoses

    BX52R, BX72R, BX102R Attach to a Tractor Tractor Wood Chipper 5.4 Connect Hydraulic Hoses 5.5 P3 PULSE Equipped Models The following models include a P3 PULSE electronic control WARNING! system: Hydraulic oil under pressure can penetrate the • BX52RI skin or eyes causing serious injury. •...

  • Page 27: Controls

    BX52R, BX72R, BX102R Controls Tractor Wood Chipper 6. Controls This section reviews the controls on the chipper. Before starting to work, all operators should familiarize themselves with the location and function of all controls. 6.1 Discharge Chute The discharge chute has a spring-loaded latch handle that allows the chute to be positioned at any angle, then locked into position with the latch.

  • Page 28: Feed Roller Control Bar

    BX52R, BX72R, BX102R Controls Tractor Wood Chipper 6.3 Feed Roller Control Bar Once moved into either Stop position, the bar is locked there until the Detent Release Lever is pulled up to release it. WARNING! Risk of serious injury or death. Keep hands, feet and clothing away from feed rollers when the chipper is operating.
  • Page 29 BX52R, BX72R, BX102R Controls Tractor Wood Chipper 6.3.1 STOP Positions The feed rollers stop any time the control bar is pushed fully forward or pulled fully back to either STOP position. • Push the feed roller control bar fully forward (towards the feed table) to the maximum detent position to stop the feed rollers.
  • Page 30 BX52R, BX72R, BX102R Controls Tractor Wood Chipper 6.3.2 Forward (Feed) • Lift up the detent reset lever, push the control bar forward to the first detent position to start the forward feed. This is the normal operating position. The control bar stays in this position until moved.

  • Page 31: Feed Roller Flow Control Valve

    BX52R, BX72R, BX102R Controls Tractor Wood Chipper 6.4 Feed Roller Flow Control Valve 6.5 Easy Start System The hydraulic feed circuit is equipped a flow control valve that Easy Start means there is 1/2"–1" (12–25 mm) free movement can be manually set to adjust chipping speed rate. at the top of the feed roller springs allowing the roller wheel to easily climb up on large material before spring tension begins.

  • Page 32: Rotor Lock

    BX52R, BX72R, BX102R Controls Tractor Wood Chipper 6.6 Rotor Lock The Rotor Lock is used to secure the rotor from moving while the upper rotor housing is open. It can only be engaged when the rotor housing is open. The spring pin cannot be engaged when the rotor housing is closed.

  • Page 33: P3 Pulse Electronic Control System

    Wallenstein Equipment dealer or distributor. • The machine status (ready to operate, rotor jam, or upper rotor housing open). The Wallenstein P3 PULSE Electronic Control System optimizes • The feed-roller status (forward, neutral, or reverse). the capacity of the wood chipper.
  • Page 34 BX52R, BX72R, BX102R Controls Tractor Wood Chipper 6.7.2 Indicator Panel The indicator panel is part of the P3 PULSE electronic control Read the Operator's Manual system. Two LED lights illuminate to communicate the current For more information about the meaning of machine and feed-roller status.
  • Page 35 BX52R, BX72R, BX102R Controls Tractor Wood Chipper 6.7.3 Display Start-up Screen The start-up screen briefly displays the P3 PULSE™ logo when the machine turns on. 01247 01237 Fig. 39 – P3 PULSE display 1. Display Screen The display screen is part of the P3 PULSE electronic control system display.
  • Page 36 BX52R, BX72R, BX102R Controls Tractor Wood Chipper Main Screen The Main screen is the default screen that is displayed when the machine's ignition key is in the ON position. Press the soft key 0:00 HOURS FEED POSITION below Home on any screen to open the Main screen. NEUTRAL ROTOR SPEED 0000...
  • Page 37 (see page 39) to see an overview of the machine operating parameters (for example; feed roller position, rotor speed, solenoid valve current, or current feed settings). • OEM SETTINGS – Only authorized Wallenstein Equipment personnel are permitted to access the original equipment manufacturer (OEM) settings (see page 40). 01856 Open a screen: Fig.
  • Page 38 BX52R, BX72R, BX102R Controls Tractor Wood Chipper Max Feed Speed MAX FEED FEED SETTINGS SPEED MAX FEED MIN FEED FEED START MIN ROTOR SPEED SPEED SPEED 0000 0000 Sets the maximum (max) feed roller speed in 5% increments. The value is shown as a percentage of the maximum speed (100%).
  • Page 39 BX52R, BX72R, BX102R Controls Tractor Wood Chipper Reset Defaults Screen The Reset Defaults screen provides the option to return the SETTINGS FEED SETTINGS RESET DEFAULTS P3 PULSE setup parameters to the factory settings or cancel DIAGNOSTICS OEM SETTINGS and keep the current settings. Complete one of the following: •...
  • Page 40 BX52R, BX72R, BX102R Controls Tractor Wood Chipper OEM Settings IMPORTANT! Only authorized Wallenstein Equipment SETTINGS FEED SETTINGS RESET DEFAULTS personnel are permitted to access the OEM settings. If DIAGNOSTICS OEM SETTINGS an unauthorized person accesses the OEM settings, it immediately voids the machine warranty.

  • Page 41: Hydraulic Feed Roller Lift Option (Bx102R Only)

    BX52R, BX72R, BX102R Controls Tractor Wood Chipper 6.8 Hydraulic Feed Roller Lift Option (BX102R only) WARNING! Risk of critical injury! Never place any part of your body in the rollers without the machine stopped and the locking pin in place. When performing maintenance on the roller and lift, follow the maintenance procedure carefully.

  • Page 42: Hydraulic Winch Option (Bx102Rp Only)

    BX52R, BX72R, BX102R Controls Tractor Wood Chipper 6.9 Hydraulic Winch Option (BX102RP only) CAUTION! Stay clear of the winch rope while winching. Injury from entanglement or rope burn could occur! W056 CAUTION! Always make sure the area is clear of bystanders when operating the winch.
  • Page 43 BX52R, BX72R, BX102R Controls Tractor Wood Chipper Winch Control Valve • Pull the hydraulic control lever back towards you and hold to wind the rope in. Releasing the lever returns it to neutral and the winch stops. • Push the lever forward to allow the rope to unwind under power.

  • Page 44: Operating Instructions

    BX52R, BX72R, BX102R Operating Instructions Tractor Wood Chipper 7. Operating Instructions IMPORTANT! Do not use PTO Cruise WARNING! Control with this wood chipper. The chipper rotor slows and speeds up as Risk of serious injury or death. Keep hands, feet and clothing away from feed rollers when the material is fed in.

  • Page 45: Pre-Start Checklist

    BX52R, BX72R, BX102R Operating Instructions Tractor Wood Chipper • Use care when feeding material into chipper. Do not Item to check send metal, bottles, cans, rocks, glass or other foreign material into wood chipper. If foreign material enters Check that all bearings turn freely. Replace if they do chipper, inspect machine for damaged or loose parts not.

  • Page 46: Before Startup

    BX52R, BX72R, BX102R Operating Instructions Tractor Wood Chipper 7.3 Before Startup 11. With the feed table in position, engage the spring-loaded table lock pins to secure the table. 1. Check the hydraulic oil level in the tractor. 2. Review Operating Safety Rules. 3.

  • Page 47: Chipping Operation

    BX52R, BX72R, BX102R Operating Instructions Tractor Wood Chipper Adjustable Ski Height (BX52R only) 7.4 Chipping Operation The BX52R ski can be adjusted up to 6" (15 cm) if required, Chipper Capacity to help align the PTO shaft when attaching the chipper to the tractor.

  • Page 48: P3 Pulse Equipped Models

    • Once back at operating rpm, P3 PULSE automatically resumes forward feed. Auxiliary Power Pack-Equipped Machines The Power Pack for the BXR Series chipper is powered by the PTO of your tractor and must be installed before attaching the tractor to the chipper.

  • Page 49: Winch-Equipped Models

    BX52R, BX72R, BX102R Operating Instructions Tractor Wood Chipper 7.6 Winch-equipped Models Rope Inspection It is a good idea to check the entire rope for wear and re spool it (BXR102RP / BX102RPI) neatly after every use. Check the winch rope for any cut strands, fraying parts, abrasion, or heat damage from the winch.

  • Page 50: Stopping Procedure

    BX52R, BX72R, BX102R Operating Instructions Tractor Wood Chipper 7.6.2 Synthetic Chokers 7.7 Stopping Procedure Synthetic chokers are available as an accessory. These chokers 1. Stop feeding material into the hopper. weigh less than the steel chain chokers and are easier to handle, however are more susceptible to abrasion.

  • Page 51: Unplugging The Chipper

    BX52R, BX72R, BX102R Operating Instructions Tractor Wood Chipper 7.9 Unplugging the Chipper The wood chipper is designed to handle a wide range of material sizes without any problem. However, in the event material gets lodged in the chipper, follow this procedure to clear the blockage.
  • Page 52 BX52R, BX72R, BX102R Operating Instructions Tractor Wood Chipper 10. Open the lower roller clean-out tray located under the feed rollers and carefully remove any debris. Close and secure the tray. 00852 Fig. 64 – Lower Roller Clean-out Tray Fig. 65 – Connect Toplink to Bridge 11.

  • Page 53: Transporting The Chipper

    BX52R, BX72R, BX102R Operating Instructions Tractor Wood Chipper 7.10 Transporting the Chipper 7.10.1 Safety Rules • Do not exceed a safe travel speed. • Always follow and obey applicable highway rules and regulations. • Be sure all lights, markers and SMV sign required by the traffic regulations are in place, clean and working.

  • Page 54: Storage

    BX52R, BX72R, BX102R Operating Instructions Tractor Wood Chipper 7.11 Storage 7. Turn the discharge chute inward. 8. Touch up all paint nicks and scratches to prevent rusting. After the season's use or when the machine is not going to be 9.

  • Page 55: Service And Maintenance

    BX52R, BX72R, BX102R Service and Maintenance Tractor Wood Chipper 8. Service and Maintenance Good maintenance is your responsibility. Poor maintenance is WARNING! an invitation to trouble. Risk of serious personal injury. Stop engine before performing ANY service or maintenance 8.1 Service and Maintenance Safety procedure.

  • Page 56: Maintenance Schedule

    BX52R, BX72R, BX102R Service and Maintenance Tractor Wood Chipper 8.3 Maintenance Schedule Perform at time shown or hour Every 8 hours or Every 50 hours or As required Reference interval, whichever comes first. daily annually Item Check the condition of all hydraulic lines, hoses and fittings.

  • Page 57: Grease Points

    BX52R, BX72R, BX102R Service and Maintenance Tractor Wood Chipper 8.4 Grease Points IMPORTANT! Use a hand-held grease gun for all greasing. Pump one shot of grease per fitting. • Wipe grease fitting with a clean cloth before greasing to avoid injecting dirt and grit. •...
  • Page 58 BX52R, BX72R, BX102R Service and Maintenance Tractor Wood Chipper IMPORTANT! Use a hand-held grease gun for all greasing. Grease Points Pump one shot of grease per fitting. Location – Every 50 hours of operation or annually • Wipe grease fitting with a clean cloth before greasing to PTO Shaft Shield avoid injecting dirt and grit.
  • Page 59 BX52R, BX72R, BX102R Service and Maintenance Tractor Wood Chipper Lubricate Hinges and Pivot Points – As Location required Rotor Cover Hinge Discharge Chute Rotate Hood Deflector Feed Table Hinges Feeder Control Bar Control Bar Roller Hinge Clean-out Tray 00869 Fig. 72 – Grease Hinges and Pivot Points...

  • Page 60: Pto Shaft Maintenance

    BX52R, BX72R, BX102R Service and Maintenance Tractor Wood Chipper 8.4.1 Hydraulic Feed Roller Lift (Option) 8.5 PTO Shaft Maintenance Grease cylinder pivot points every 50 hours. Grease the PTO shaft every 8 hours. The hydraulic feed roller lift option has a hydraulic cylinder to lift or lower the top feed roller located on top of the feed roller chute.

  • Page 61: Twig Breaker

    BX52R, BX72R, BX102R Service and Maintenance Tractor Wood Chipper Sharpening Rotor Blades Replace broken shear bolts with one the same size. Always determine the cause of the problem and correct it before 1. Remove the blades from the rotor to sharpen. Sharpen at a resuming work.

  • Page 62: Ledger Knife

    BX52R, BX72R, BX102R Service and Maintenance Tractor Wood Chipper 8.8 Ledger Knife 8.8.1 Ledger Knife Clearance Use the ledger setting gauge to check knife clearance. The Observe ledger knife performance daily. Check the ledger thickness of the gauge is the correct ledger blade clearance. knife sharpness every 50 hours.
  • Page 63 BX52R, BX72R, BX102R Service and Maintenance Tractor Wood Chipper 8.8.2 Changing Ledger Knife 4. Turn the rotor past the ledger knife with the gauge inserted between them to check clearance. The gauge should be The ledger knife is removed through the bottom of the chipper. tight.

  • Page 64: Feed Rollers

    BX52R, BX72R, BX102R Service and Maintenance Tractor Wood Chipper 8.9 Feed Rollers 4. Wind in the turnbuckle to raise the upper roller to the desired height. The top and bottom feed rollers may occasionally require some The top roller is secured in the raised position by the turnbuckle maintenance (for example, removing a jam, cleaning, inspection, and is safe to begin maintenance.

  • Page 65: Electrical System - General

    BX52R, BX72R, BX102R Service and Maintenance Tractor Wood Chipper 8.9.2 Feed Roller Maintenance on 8.10 Electrical System – General BX102RP Models IMPORTANT! When assembling or replacing wire 1. Start the tractor or power pack to energize the hydraulics. harnesses, apply a thin coating of silicone dielectric grease 2.

  • Page 66: Troubleshooting

    Before troubleshooting, read and understand the reading this information, please contact your local dealer, the Service and Maintenance Safety on page 55. distributor, or Wallenstein Equipment. Before you call, please Set the machine to a safe condition. have the serial number for your product handy.
  • Page 67 BX52R, BX72R, BX102R Troubleshooting Tractor Wood Chipper Problem Cause Solution Check rotor and ledger blades. Rotate, sharpen or replace. See page Dull blades. Poor Chip Quality Poor quality material. Material is small or rotting. Mix with higher quality material. Space between the rotor blades and ledger knife is Use the ledger guide tool to check the clearance.

  • Page 68: Specifications

    BX52R, BX72R, BX102R Specifications Tractor Wood Chipper 10. Specifications 10.1 Machine Specifications Model BX52R BX72R BX102R Drive System Direct Drive, Power take-off with shear bolt Horsepower Range 40–55 hp 50–85 hp 80–120 hp (34–41 kW) (37–63 kW) (60–89 kW) Minimum hydraulic flow 3–6 gpm 4–8 gpm required...

  • Page 69: Common Bolt Torque

    BX52R, BX72R, BX102R Specifications Tractor Wood Chipper 10.2 Common Bolt Torque Checking Bolt Torque Imperial Bolt Torque Specifi   cations The tables shown give correct torque values for various Torque Value bolts and capscrews. Tighten all bolts to the torque Bolt values specified in the table, unless indicated otherwise. SAE Gr�...

  • Page 70: Hydraulic Fitting Torque

    BX52R, BX72R, BX102R Specifications Tractor Wood Chipper 10.3 Hydraulic Fitting Torque Hydraulic Fitting Torque Tightening Flare Type Tube Fittings Tube Size Flats From Size Torque value 1. Check flare and flare seat for defects that might Across Finger Tight cause leakage. Flats lbf•ft Inches...

  • Page 71: Product Warranty

    Tractor Wood Chipper 11. Product Warranty LIMITED WARRANTY Wallenstein products are warranted to be free of defects in materials and workmanship under normal use and service, for a period of Five Years for Consumer Use Two Years for Commercial/Rental Use from the date of purchase, when operated and maintained in accordance with the opera�ng...

  • Page 72: Index

    BX52R, BX72R, BX102R Index Tractor Wood Chipper 12. Index Hydraulic Fitting Torque ������������������������������������������������������ 70 Hydraulic Oil ������������������������������������������������������������������������ 55 Attach to Tractor ������������������������������������������������������������������ 21 Hydraulic Winch ������������������������������������������������������������������ 42 Connect 3-point Hitch ���������������������������������������������������� 21 Winch Arm Extension����������������������������������������������������� 42 Connect Hydraulic Hoses ���������������������������������������������� 26 Winch Control Valve ������������������������������������������������������...
  • Page 73 BX52R, BX72R, BX102R Index Tractor Wood Chipper Size �������������������������������������������������������������������������������� 22 Three-point Hitch����������������������������������������������������������������� 21 Category I and II ������������������������������������������������������������ 21 Replacing Damaged Safety Signs �������������������������������������� 16 Connect ������������������������������������������������������������������������� 21 Reverse ������������������������������������������������������������������������������� 30 Transporting ������������������������������������������������������������������������ 53 Rotor Blades ����������������������������������������������������������������������� 61 Prepare for Transport����������������������������������������������������� 53 Sharpening ��������������������������������������������������������������������...

  • Page 76: Wallensteinequipment.com

    WallensteinEquipment.com...

This manual is also suitable for:

Bx52rBx72rBx102r

Table of Contents