Advertisement
Quick Links
Please read instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be
sure you have all needed parts and know where they go.
If question exist, please call us @1-800-222-7023. We will be happy to answer any questions concerning this product.
Check all fasteners for proper torque. Check to ensure for adequate clearance between all components.
Periodically check all hardware for tightness.
KIT CONTENTS:
1-Front Bumper
1-Drivers Side Bracket
1-Passengers Side Bracket
1-License Plate Bracket
2-Sets of 2" Square LED Lights
1-20" LED Light
Torque Specs:
Size
Grade 5
5/16"
15 ft/lbs
3/8"
30 ft/lbs
7/16"
45 ft/lbs
1/2"
65 ft/lbs
9/16"
95 ft/lbs
5/8"
135ft/lbs
3/4"
185ft/lbs
Thank you for choosing Rough Country for all your vehicle needs.
13mm wrench or socket
17mm wrench and socket
18mm wrench and socket
19mm wrench and socket
Grade 8
Size
20ft/lbs
6MM
35ft/lbs
8MM
60ft/lbs
10MM
90ft/lbs
12MM
130ft/lbs
14MM
175ft/lbs
16MM
280ft/lbs
18MM
FORD 2011-16 F-250 Front Bumper
TOOLS NEEDED:
Long Nose Plyers
Rachet
Class 8.8
Class 10.9
5ft/lbs
18ft/lbs
23ft/lbs
32ft/lbs
45ft/lbs
55ft/lbs
75ft/lbs
85ft/lbs
120ft/lbs
130ft/lbs
165ft/lbs
170ft/lbs
240ft/lbs
HARDWARE INCLUDED:
2-6mm x 20mm Button Screw
2-6mm Lock Nut
4-6mm Flat Washer
4-8mm Lock Washer
6-8mm Flat Washer
2-8mm Hex Nut
2-8mm x 16mm Hex Bolt
2-8mm x 25mm Hex Bolt
4-12mm x 35mm Hex Bolt
4-12mm Lock Washer
8-12mm Flat Washer
4-12mm Hex Nut
9ft/lbs
921107830
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for rough country 921107830
Summary of Contents for rough country 921107830
- Page 1 921107830 FORD 2011-16 F-250 Front Bumper Thank you for choosing Rough Country for all your vehicle needs. Please read instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be sure you have all needed parts and know where they go.
- Page 2 INSTALLATION INSTRUCTONS 1. If equipped unplug the fog light wiring harness. See Photo 1. 2. Remove the 3 push pins holding the factory splash guard onto the back side of the bumper using long nose plyers. Remove from the vehicle this will not be reused. See Photo 2. Photo 1 Photo 2 Disconnect the fog light harness.
- Page 3 Install the 20” LED light. 10. Install the new rough country bumper onto the vehicle using the OE bolts and nut plate on the back side of the bumper into the stock bumper mount on the driver and passengers side. See Photo 11.
- Page 4 13. Install the supplied bumper bracket on the frame with the stock hardware. See Photo 13. 14. Install the new rough country bumper brace onto the bumper using the supplied 12mm x 35mm bolts, washers and nuts into the bumper. See Photo 13.
Need help?
Do you have a question about the 921107830 and is the answer not in the manual?
Questions and answers