Advertisement
Quick Links
Thank you for choosing Rough Country for all your vehicle needs.
Please read instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be
sure you have all needed parts and know where they go.
If question exist, please call us @1-800-222-7023. We will be happy to answer any questions concerning the design,
function, and correct use of our products.
Rough Country LED lights are for off-road use only.
KIT CONTENTS:
1-Rear Bumper
4– 2" Flush Mount LED
HARDWARE INCLUDED:
8-4mm Allen head bolts
2-6mm Allen Head bolts
4-6mm Flat Washers (Small OD)
4-6mm Flat Washers (Large OD)
2-6mm x 16mm Bolts
4-6mm Lock Nuts
2-10mm x 50mm Bolts
2-10mm Lock Nuts
4-10mm Flat Washers
4-12mm x 35mm Bolts
4-12mm Lock Nuts
8-12mm Flat Washers
6-14mm x 45mm Bolts
6-14mm Lock Nuts
12-14mm Flat Washers
Chevrolet Silverado 1500 2007-18 Rear Bumper
TOOLS NEEDED:
Pry Tool/Flat Head Screwdriver
15mm Socket/Wrench
16mm Socket/Wench
18mm Socket/Wrench
19mm Socket/Wrench
921077300
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for rough country 921077300
Summary of Contents for rough country 921077300
- Page 1 921077300 Chevrolet Silverado 1500 2007-18 Rear Bumper Thank you for choosing Rough Country for all your vehicle needs. Please read instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be sure you have all needed parts and know where they go.
- Page 2 INSTALLATION INSTRUCTIONS 1. Place the vehicle in park. 2. Unplug the trailing wiring harness from bumper. Note spare tire was removed for a better view. See Photo 1. 3. Unplug the license plate lights at connector and any other wiring leading to rear bumper. See Photo 2. Photo 1 Photo 2 4.
- Page 3 8. After stock bumper is off remove the trailer wiring connector from bumper by pressing on the two clips. Retighten the four hitch bolts. See Photo 7. 9. Transfer the factory proximity sensors from the stock bumper to the new bumper and install the proximity sensor using the supplied 4mm allen head bolts.
- Page 4 Photo 16 By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applica- ble Federal, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buy- ers responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold.
Need help?
Do you have a question about the 921077300 and is the answer not in the manual?
Questions and answers