Waterco ECO-V 150 Owners & Installation Manual page 25

3. When a FAULT is present and the FAULT LED is illuminated, only the STOP key
will function. The remaining buttons become disabled.
4. When the FAULT LED is continuously ON (i.e. not blinking), a FAULT is present in
the controller. When the FAULT LED is blinking every one (1) second, a FAULT is
present in the user interface.
5. When the FAULT has cleared, the FAULT LED will turn OFF.
6. Once the FAULT is cleared, if the Waterco ECO-V 150 was previously running, it
will automatically resume running the normal schedule.
Please see Section 14 for troubleshooting issues and their resolutions.
13 Specifications
Refer Joey re chart image
Remove crossed section from Chart