Waterco ECO-V 150 Owners & Installation Manual page 13

6.2 User Interface Key Pad Overview
Caution: If power is connected to the Waterco ECO-V 150 motor, pressing any of
the following buttons referred to in this section 6.2 could result in the motor starting.
Failure to recognize this could result in personal injury or damage to equipment.
1. STEP 1 (Set Schedule)
2. STEP 2 (Set Schedule)
3. STEP 3 (Set Schedule)
4. OVERRIDE (Settings)
5. START
6. STOP
6.3 Set the Schedule
Caution: If power is connected to the Waterco ECO-V 150 motor, pressing any of
the following buttons referred to in this section 6.3 could result in the motor starting.
Failure to recognize this could result in personal injury or damage to equipment.
Set the DURATION and SPEED for the Waterco ECO-V 150 using the keys on the
User Interface. The schedule is based on a 24-hour schedule and will repeat each
day of the week.
Refer Joey re chart image
The highest speed rating for the Waterco ECO-V 150 is 3450 RPM and the lowest is
600 RPM. Unless a new user-defined schedule is entered, the Waterco ECO-V 150
will operate based on the following factory default schedule:

DURATION and SPEED

DURATION and SPEED

DURATION and SPEED

DURATION and SPEED