Siemens SIMATIC HMI KTP400 Manual page 26

4 Installation and Commissioning
No. Action/response
Proceed as follows:
9.
1. Click on the "Alarm
window" to open its
properties.
2. Go to the "Properties" tab
and make sure that the
warning messages (here
for wind) which you have
configured, are enabled
under "Current alarm
states" and
"Unacknowledged alarms".
Once you have completed all
10.
changes and modifications of
the warning messages, click
"Load" in the toolbar to load the
project to the KTP700.
House Control and Weather Sensors - LOGO! Set 11
Entry ID: 68585346, V2.1, 09/2018
WinCC Basic
26