Siemens SIMATIC HMI KTP400 Manual page 17

4 Installation and Commissioning
No. Action/response
Press "Network interface" to open the
9. 1.
dialog for changing the network settings.
2. Make your choice between automatic IP
address assignment via "DHCP" and
manual IP address assignment.
3. Touch the respective input fields and
enter the IP address and the subnet
mask with the screen keyboard, here:

IP address: 192.168.1.80

Subnet mask: 255.255.255.0
Under "Ethernet parameters" in the
4.
"Mode and speed" selection field, tick
"Auto Negotiation"; this automatically
detects and sets the connection type
and the transmission rate in the
PROFINET network.
Activate the "LLDP" switch to enable the
5.
operator panel to exchange information
with other operator panels. In this
example, "LLDP" can be activated or
deactivated.
Under "PROFINET" in the "Device
6.
name" field, enter a network name for
your operator panel. The name must
meet the following requirements:

Max. four blocks with max. 63
characters each. Example:
"Press1.Fender.
Bodywork.Hall3"

Characters from "a" to "z", numbers "0"
to "9"; special characters: "-" and ".
House Control and Weather Sensors - LOGO! Set 11
Entry ID: 68585346, V2.1, 09/2018
KTP400 display
17