Clearing Bypass Transport Paper Jams (4890/92C Only) - Xerox 4890 Troubleshooting Manual

Clearing paper misfeeds and jams

Clearing bypass transport paper jams (4890/92C only)

4-28
5. Remove only the set of pages leaving the stitcher/stacker at
the right, and place it on the output in the stacker tray. Do not
remove any other pages from this area.
NOTE: The pages were compiled by the stitcher/stacker into
a set (stapled or not), but something prevented the set from
being delivered to the stacker. You put the set in the stacker
tray because the system has counted it as completed.
6. Close the side and top covers.
7. Press the Continue button to resume printing.
To clear bypass transport paper jams:
1. Verify that a sheet is caught between the bypass transport
and the finishing device. If a sheet is there, remove it and
discard it.
2. Open the top cover of the bypass transport by lifting upward
on the recessed handle.
3. Remove and discard any paper that you see in the bypass
transport.
4. Grasp the handle again and slide the top cover to the right.
This exposes the remainder of the bypass transport paper
path.
Troubleshooting Guide