Xerox 4890 Troubleshooting Manual page 40

Clearing paper misfeeds and jams
4-16
2. With your left hand, move and hold the green latch to the right
(the direction of the arrow marked on it). With your right hand,
pull out the large green handle until the fuser unit latches in
the fully open position.
Take care not to touch any parts in this area. They may be
hot enough to cause burns.
3. Raise the small green handle at the front of the fuser
assembly.
4. Remove and discard any paper that you find in this area.
Do not use a sharp object to remove paper wrapped around the
fuser rolls. Attempting to do so could damage the roller and
require its replacement.
5. Return the small green handle to its original position.
WARNING
CAUTION
Troubleshooting Guide