Clearing Paper Jams From Area 4 - Xerox 4890 Troubleshooting Manual

Clearing paper jams from area 4

Troubleshooting Guide
NOTE: When paper jams occur in areas 3 through 5, three
extra blank sheets are sent through the printer to ensure that
the fuser is clean. These sheets are sent to the top tray and
should be discarded. You are not charged for these sheets.
Follow these steps to clear jams from area 4.
The laser safety label located on the inside left front door of
the printer advises you that the panel below it must not be
removed, except by a service representative.
1. Open the middle and left doors and locate area 4. Remember
to clear the jam in area 5 first, if you are directed to clear both
areas.
Clearing paper misfeeds and jams
WARNING
4-15