GBC 16 Series User Manual page 51

Setting the Side Guide
The purpose of this procedure is to ensure that each sheet of paper maintains
registration as it passes through the FusionPunch II.
Note: Use tab stock or cover stock when performing these procedures.
1
Press the
2
Open the Punch Cover.
3
Open the Document Transport Ball Track assembly, as shown in
Figure 2-7.
4
Open the Sheet Eject assembly, as shown in Figure 2-7.
Document
Transport Ball
Track Assembly
Setting the Side Guide
Figure 2-7: Preparing to Adjust the Side Guide
button.
Sheet Eject
Strap Assembly
2-9
2