GBC 16 Series User Manual page 46

3
Open the Sheet Eject Strap assembly, as shown in Figure 2-2.
4
Release the Punch Arm retaining levers down and to the side, as shown
in Figure 2-2.
Punch Arm
Retaining
Levers
5
Unlock the Die: turn the Die Lock knob clockwise until a "click" is felt,
as shown in Figure 2-2. Do not turn past that point or you will lock the
Die again.
2-4
Sheet Eject Strap
Assembly
Figure 2-2: Unlocking the Die Assembly
Die Lock
Knob
General Procedures