Operation - Yard force AQUAJET Original Instructions Manual

Switch ON:
1. Depress the safety lock button with your thumb keep it in place, at same time depress
the switching trigger. (Fig. K&L)
2. Hold the trigger for at least 5 seconds until there is a steady stream of water.
NOTE
: Be prepared for the recoil force of the emitted water jet! Ensure that you are standing
firmly and that you are holding decive securely with both hands, otherwise you could injure
yourself or other people.
Switch OFF:
1. Release the switch trigger.
Operating the AQUAJET
Adjusting rotary handle:
This device is equiped with the handle that can be adjusted. Press the rotary handle button
and keep it in place, adjust hanlde as in the picture shown. (Fig. M)
Adjusting working pressure:
Press the Eco/Pressure switch button to switch Eco/HIGH working pressure. (Fig. N)
Eco model: Green light on.
Using the foam sprayer (Fig. O&P)
1. Fill the bottle with detergent (detergent mixture level to be between 30-50%).
2. Install the foam sprayer on to the device.
Using the brush (Fig. Q)
Install the brush on to the device like picture shown.
3 in 1 nozzle (Fig. R)
3 in 1 noozle can be adjusted to 3 different nozzles by rotating the head.
Pressure nozzle
Turbo nozzle
Low pressure nozzle

OPERATION

25