Troubleshooting - Yard force AQUAJET Original Instructions Manual

WARNING:
pack has been removed.
Fault/
malfunction
Appliance does not
turn ON
Appliance water
pressure too low
Water leaks
Detergent cannot
spray out

TROUBLESHOOTING

Before performing any repair work, always ensure that the battery
Cause
Battery pack discharged?
Battery pack is not connected
correctly dis charged
place correctly.
Safety lock off button has not
been depressed
m/c PCB activated.
Pump frozen
Hose damaged or leaks in the
connections.
Filter blocked
Hose is trapped or kinked
Inadequate water supply
The appliance /water source
height is too large
O-ring split/broken
Attachment are not installed
correctly
Accessories broken
Speed setting on Low
Deposits or restrictions in the
detergent system
Remedy
Fully charge the battery pack
Install the battery pack once again.
Check start procedure
1. depress lock off
2. depress switch lever
Restart the device
Check and allow the appliance to
thaw
Change the hose - check the hose
for leaks and repair - securely tighten
the screw connection
Clean filter on the appliance
Straighten out the hose
Check water suply levels
Lower the appliance - maximum
working height @1.5M- 5ft
Replace the accessory or change
the O-ring
Remove & re-install the attachment
correctly
Replace accessories
Select speed setting High
Flush with clean water and remove
all debris
28