Wolf E Series Information Booklet page 68

TESTING THE OVEN RELAY BOARD
Element Testing
First access diagnostic mode. Once in diagnostic mode, the technician
can turn the oven function selector bezel to activate an element. The
element relay and the double line breaker(dlb) will close to complete a
240/208 VAC circuit through a specific element. If the oven controller
detects the current running through the closed circuit, the **CFH light
will be illuminated.
NOTE: Diagnostic Mode will end 2 minutes after last key stroke or
when the CLEAR key is pressed.
Turn Bezel
(Cooking Mode)
Stone
(Use "PROOF" for 18" Cavity)
Clean
Conv
Conv Roast
Conv Broil
Conv Bake
** Call For Heat
Relay(s) Activated
Left Convection Element
Right Convection Element
Bake Stone Element
(must be plugged in)
Inner Bake Element
Broil Element
Outer Bake Element
PAGE 68
Response
**CFH Indicator Light
Illuminates
**CFH Indicator Light
Illuminates
**CFH Indicator Light
Illuminates
**CFH Indicator Light
Illuminates
**CFH Indicator Light
Illuminates
**CFH Indicator Light
Illuminates