Wolf E Series Information Booklet page 27

UNIQUE ELECTRONIC CONTROL INPUT OPERATIONS:
User Option Mode
User option mode is activated by pressing and holding CLOCK key for 3 sec-
onds. (Use following keys to navigate through menu)
ENTER Key: Moves to next selection in order described below, saving any changes. If at
last selection, returns to first selection.
CLEAR Key: Moves to previous selection. Any changes made to current selection are dis-
carded. If current selection is first (language), returns to idle mode.
OFF Key: Either OFF key will exit User Settings Menu and return to Idle. Any changes
made to current selection are discarded.
Language Selection (LILA will display "SELECT LANGUAGE")
ENGLISH - 1, GERMAN - 2, FRENCH – 3, SPANISH – 4, ITALIAN - 5
Temperature Display Preference
User will be prompted with the following message: "SELECT TEMPERATURE
UNITS". PRESS 1 – F, PRESS 2 – C
User Preference Offset
If a double oven, upper oven offset will be prompted first, followed by lower
oven offset. Current offset will be shown on MTD, along with proper tempera-
ture units. This will be replaced with digits entered by user. UATD will always
show currently accepted value for upper oven offset, and, if a double oven,
LATE will show lower oven offset. There is a maximum offset of ± 35F, or ±
19C. Invalid entries will be rejected with an invalid entry beep and initial offset
will again be displayed.
Single oven: "ENTER TEMPERATURE OFFSET. TOGGLE +/- USING TIMED
COOK KEY. PRESS ENTER TO CONTINUE".
Double oven: "ENTER TEMPERATURE OFFSET FOR (UPPER/LOWER
OVEN). TOGGLE +/- USING TIMED COOK KEY. PRESS ENTER TO CON-
TINUE". Pressing enter will cause user option mode to advance to next step.
NOTE: Entering a positive number will increase the oven temperature.
PAGE 27