Wolf E Series Information Booklet page 64

Delayed Start Feature - (To Start Cooking Later)
• Turn oven function selector bezel to the desired mode.
• Press COOK TIME touch pad.
• Press up or down arrow touch pad on the display panel to
increase or decrease the desired cook time.
• Press STOP TIME touch pad, then use arrow touch pads on the
display panel to increase or decrease the stop time.
• Press the ENTER touch pad.
• To exit Delayed Start Feature, turn oven function selector bezel to
OFF.
Probe Feature
NOTE: Preheat oven in desired mode.
• Insert probe connector into receptacle, inside oven cavity.
• PROBE will appear on display panel. Probe temperature is preset
to 160°F (70°C).
• To change probe temperature, immediately turn oven selector
knob right to increase probe temperature or left to decrease probe
temperature setting.
• Press ENTER touch pad or after 2 seconds oven will turn on by
default.
NOTE: Probe temperature will flash in oven selector knob when tem-
perature has been reached.
• To exit, turn oven function selector bezel to OFF.
PAGE 64