Wolf E Series Information Booklet page 66

DIAGNOSTIC MODE
Initiating Diagnostic Mode
• Oven function selector bezel must be in the OFF position.
• Press and hold CLOCK touch pad and TIMER touch pad for 3
seconds.
• Turn the oven selector knob to the right seven separate times, this
will toggle from error code 1 thru 7. To return to error code
number one, turn oven selector knob to the left seven
separate times.
NOTE: The software version will be displayed in the hours and min-
utes display of the clock.
NOTE: Once diagnostic mode is entered, there is a 2 minute time
out, which is restarted each time a key is pressed.
• To clear error codes once unit has been fixed, press the CLEAR
key.
• To exit Diagnostic Mode, press the ENTER touch pad.
PAGE 66