Label Insertion - Xerox C3000 Facsimile Reference Manual

Other Transmission Features

Label Insertion

With this function you can have the receiver's name printed on the document
that is received at the other end.
Important
❒ To use this function, set Label Insertion to [On] when registering fax destina-
2
tions in the Address Book, and also set "Label Insertion" to on when sending
fax documents.
❒ When there is an image around the area where the Label is to be printed, that
image is deleted.
The receiver's name is printed as follows:
• Receiver's name: printed at the top of the page and preceded by "To:".
• Standard message: the programmed message is printed within the next two
lines.
Set this function as follows:
• Set Label Insertion to [On] when programming fax destinations.
• Set Label Insertion to on when sending fax documents.
• On the Standard Message screen, select the standard message you want to
print.
A
Place the original, and then select the scan settings you require.
B
Press [TX Mode].
C
Select [Option Setting].
138